A PHP Error was encountered

Severity: Notice

Message: Undefined index: HTTP_ACCEPT_LANGUAGE

Filename: paginas/productos.php

Line Number: 10

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/exafan/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 675

EXAFAN products, always at the avant–garde within our sector.

Exhaust fans M+M

M+M Exhaust fans with stainless steel blade (Galvanized frame) - EX-50-

Associated documents

M+M Exhaust fans with stainless steel blade (Galvanized frame) - EX-50-

The entire range of the EX fans are mainly based on its long endurance, low maintenance and excellent air flow/power consumption.

  • Fan structure made of galvanized  
  • „Sheets made of steel with a reinforced centrifugal opening system 
  • Central pulley and propeller support including a high quality water tight greased bearing for life. 
  • Motor with an IP 55 protection and insulating coil degree type F. 
  • Fan venturi made of plastic material with UV protection. 
  • „Front grid according to regulation. 
  • Locking shutter with a specific design in order to avoid the air inlet and light entrance. ​

*Possibility to supply with a motor IE2

MODELS 

 

Ref Subst Description
EX1MMNX-50T 20070 Three-phase exhaust fan with stainless steel blades Mesh+Mesh, of 1 HP
EX15MMNX-50T 20080 Three-phase exhaust fan with stainless steel blades Mesh+Mesh, of 1´5 HP
EX1MMNX-50T-IE2 20070-IE2 Three-phase exhaust fan with stainless steel blades Mesh+Mesh, of 1 HP. IE2
EX15MMNX-50T-IE2 20080-IE2 Three-phase exhaust fan with stainless steel blades Mesh+Mesh, of 1´5 HP. IE2

 

TECHNICAL DATA

MODEL AIR FLOW FAN MOTORIII NIVEL SON. APROX WEIGHT
EX 50¨-1 38.600 m3/h  /  22.700 CFM Ø 1.270  1 CV  / 0.76 Kw  /  230 - 400 V (Tensión) 67 Dba 85
EX 50¨-1,5 41.900 m3/h  /  24.600 CFM Ø 1.270  1.5 CV  / 1.1 Kw  /  230 - 400 V (Tensión) 69 Dba 85

 

DIMENSIONS

  A B C
EX50¨-1 1.380 1.380 450
EX50¨-1,5 1.380 1.380 450

 *Measure (mm)

Exhaust fans with galvanized blades (Galvanized frame) - EX-50-

Associated documents

Exhaust fans with galvanized blades (Galvanized frame) - EX-50-

The entire range of the EX fans are mainly based on its long endurance, low maintenance and excellent air flow/power consumption.

  • Fan structure made of galvanized.
  • „Sheets made of steel with a reinforced centrifugal opening system. 
  • Central pulley and propeller support including a high quality water tight greased bearing for life. 
  • Motor with an IP 55 protection and insulating coil degree type F. 
  • Fan venturi made of plastic material with UV protection. 
  • „Front grid according to regulation. 
  • Locking shutter with a specific design in order to avoid the air inlet and light entrance. ​

*Possibility to supply with a motor IE2

MODELS 

 

Ref Subst Description
EX1MM-50T 22030 Three-phase exhaust fan with galvanized steel blades Mesh+Mesh, of 1 HP
EX15MM-50T 22040 Three-phase exhaust fan with galvanized steel blades Mesh+Mesh, of 1´5 HP
EX1MM-50T-IE2 22030-IE2 Three-phase exhaust fan with galvanized steel blades of 1 HP. IE2
EX15MM-50T-IE2 22040-IE2 Three-phase exhaust fan with galvanized steel blades of 1´5 HP. IE2

 

TECHNICAL DATA

MODEL AIR FLOW FAN MOTORIII NIVEL SON. APROX WEIGHT
EX 50¨-1 38.600 m3/h  /  22.700 CFM Ø 1.270  1 CV  / 0.76 Kw  /  230 - 400 V (Tensión) 67 Dba 85
EX 50¨-1,5 41.900 m3/h  /  24.600 CFM Ø 1.270  1.5 CV  / 1.1 Kw  /  230 - 400 V (Tensión) 69 Dba 85

DIMENSIONS

  A B C
EX50¨-1 1.380 1.380 450
EX50¨-1,5 1.380 1.380 450

 *Measure (mm)

M + M Exhaust fans with stainless steel blade - EX 36 -

Associated documents

M + M Exhaust fans with stainless steel blade - EX 36 -

The entire range of the EX fans are mainly based on its long endurance, low maintenance and excellent air flow/power consumption.The design system of the R + D department as well as the quality of the materials used, guarantee its total reliability and resistance thanks to more than 25 years of experience in the sector.

  • Fan structure made of stainless steel. 
  • „Sheets made of steel with a reinforced centrifugal opening system 
  • Central pulley and propeller support including a high quality water tight greased bearing for life. 
  • Motor with an IP 55 protection and insulating coil degree type F. 
  • Fan venturi made of plastic material with UV protection. 
  • „Front grid according to regulation. 
  • Locking shutter with a specific design in order to avoid the air inlet and light entrance. ​

MODELS

Ref Subst Description
EX05MM-50T-INOX 22051 Three-phase exhaust fan Ex36” with stainless steel blades Mesh+Mesh, of 0´5 HP
EX075NM-50T-INOX 22061 Three-phase exhaust fan Ex36” with stainless steel blades Mesh+Mesh, of 0´75 HP

 

TECHNICAL DATA 

MODEL AIR FLOW FAN MOTORIII NIVEL SON. APROX WEIGHT
EX 36¨-0,5 19.100 m3/h  /  11.240 CFM Ø 915  0.5 CV  / 0.38 Kw  /  230 - 400 V (Tensión) 62 Dba 65
EX 36¨-0,75 21.600 m3/h  /  12.690 CFM Ø 915  0.75 CV  / 0.55 Kw  /  230 - 400 V (Tensión) 62 Dba 65

 

DIMENSIONS

  A B C
EX36¨-0,5 1.090 1.090 450
EX36¨-0,75 1.090 1.090 450

 *Measure (mm)

M + M Exhaust fans withstainless steel blade - EX 50 -

Associated documents

M + M Exhaust fans withstainless steel blade - EX 50 -

The entire range of the EX fans are mainly based on its long endurance, low maintenance and excellent air flow/power consumption. The design system of the R + D department as well as the quality of the materials used, guarantee its total reliability and resistance thanks to more than 25 years of experience in the sector.

  • Fan structure made of stainless steel. 
  • „Sheets made of steel with a reinforced centrifugal opening system 
  • Central pulley and propeller support including a high quality water tight greased bearing for life. 
  • Motor with an IP 55 protection and insulating coil degree type F. 
  • Fan venturi made of plastic material with UV protection. 
  • „Front grid according to regulation. 
  • Locking shutter with a specific design in order to avoid the air inlet and light entrance. ​

*Possibility to supply with a motor IE2

MODELS

 

Ref Subst Description
EX1-50T-INOX 22071 Three-phase exhaust fan Ex50” with stainless steel blades Mesh+Mesh, of 1 HP
EX15-50T-INOX 22081 Three-phase exhaust fan Ex50” with stainless steel blades Mesh+Mesh, of 1´5 HP
EX1MM-50T-INOX-IE2 22071-IE2 Three-phase exhaust fan EX 50” totally in stainless steel Mesh+Mesh of 1 HP. IE2 motor
EX15MM-50T-INOX-IE2 22081-IE2 Three-phase exhaust fan EX 50” totally in stainless steel Mesh+Mesh of 1´5 HP. IE2 motor

 

TECHNICAL DATA 

MODEL AIR FLOW FAN MOTORIII NIVEL SON. APROX WEIGHT
EX 50¨-1 38.600 m3/h  /  22.700 CFM Ø 1.270  1 CV  / 0.76 Kw  /  230 - 400 V (Tensión) 67 Dba 85
EX 50¨-1,5 41.900 m3/h  /  24.600 CFM Ø 1.270  1.5 CV  / 1.1 Kw  /  230 - 400 V (Tensión) 69 Dba 85

 

DIMENSIONS

  A B C
EX50¨-1 1.380 1.380 450
EX50¨-1,5 1.380 1.380 450

 *Measure (mm)

M+M Exhaust fans with stainless steel blade (Galvanized frame) - EX 36 -

Associated documents

M+M Exhaust fans with stainless steel blade (Galvanized frame) - EX 36 -

The entire range of the EX fans are mainly based on its long endurance, low maintenance and excellent air flow/power consumption.

  • Fan structure made of galvanized  
  • „Sheets made of steel with a reinforced centrifugal opening system 
  • Central pulley and propeller support including a high quality water tight greased bearing for life. 
  • Motor with an IP 55 protection and insulating coil degree type F. 
  • Fan venturi made of plastic material with UV protection. 
  • „Front grid according to regulation. 
  • Locking shutter with a specific design in order to avoid the air inlet and light entrance. ​

MODELS

Ref Sbst Description
EX05MMNX-50T 22050 Three-phase exhaust fan Ex36” with stainless steel blades Mesh+Mesh, of 0´5 HP
EX075MMN-50T 22060 Three-phase exhaust fan Ex36” with stainless steel blades Mesh+Mesh, of 0´75 HP

 

TECHNICAL DATA 

MODEL AIR FLOW FAN MOTORIII NIVEL SON. APROX WEIGHT
EX 36¨-0,5 19.100 m3/h  /  11.240 CFM Ø 915  0.5 CV  / 0.38 Kw  /  230 - 400 V (Tensión) 62 Dba 65
EX 36¨-0,75 21.600 m3/h  /  12.690 CFM Ø 915  0.75 CV  / 0.55 Kw  /  230 - 400 V (Tensión) 62 Dba 65

 

DIMENSIONS

  A B C
EX36¨-0,5 1.090 1.090 450
EX36¨-0,75 1.090 1.090 450

* Measure (mm)

Exhaust fans with galvanized blades (Galvanized frame) - EX 36 -

Associated documents

Exhaust fans with galvanized blades (Galvanized frame) - EX 36 -

The entire range of the EX fans are mainly based on its long endurance, low maintenance and excellent air flow/power consumption.

  • Fan structure made of galvanized.
  • „Sheets made of steel with a reinforced centrifugal opening system. 
  • Central pulley and propeller support including a high quality water tight greased bearing for life. 
  • Motor with an IP 55 protection and insulating coil degree type F. 
  • Fan venturi made of plastic material with UV protection. 
  • „Front grid according to regulation. 
  • Locking shutter with a specific design in order to avoid the air inlet and light entrance. ​

MODELS 

 

Ref Subst Description
EX05MM-50T 22010 Three-phase exhaust fan Ex36” with galvanized steel blades Mesh+Mesh of 0´5 HP
EX075MM-50T 22020 Three-phase exhaust fan Ex36” with galvanized steel blades Mesh+Mesh of 0´75 HP

 

TECHNICAL DATA 

MODEL AIR FLOWFAN   MOTORIII NIVEL SON. APROX WEIGHT
EX 36¨-0,5 19.100 m3/h  /  11.240 CFM Ø 915  0.5 CV  / 0.38 Kw  /  230 - 400 V (Tensión) 62 Dba 65
EX 36¨-0,75 21.600 m3/h  /  12.690 CFM Ø 915  0.75 CV  / 0.55 Kw  /  230 - 400 V (Tensión) 62 Dba 65

 

DIMENSIONS

  A B C
EX36¨-0,5 1.090 1.090 450
EX36¨-0,75 1.090 1.090 450

 *Measure (mm)